Show simple item record

dc.contributor.advisorRichard I. Abbot, Jayant Sharma and Jeffrey A. Hoffman.en_US
dc.contributor.authorAaron, Benjamin S. (Benjamin Samuel)en_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Aeronautics and Astronautics.en_US
dc.date.accessioned2007-02-21T11:53:30Z
dc.date.available2007-02-21T11:53:30Z
dc.date.copyright2006en_US
dc.date.issued2006en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/36175
dc.descriptionThesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2006.en_US
dc.descriptionIncludes bibliographical references (p. 115-116).en_US
dc.description.abstractGeosynchronous satellite orbit maintenance is a very important issue. Satellites maneuver frequently requiring the ability to detect unknown maneuvers for target satellites and quickly recover an accurate orbit. This study uses angles only ground based optical tracking to detect maneuvers and recover orbits for geosynchronous satellites. Using the Analytical Graphics Inc. Orbit Determination Tool Kit sequential estimation software, a sequential estimation filter was "tuned" and validated in various ways. Then, a parametric study of maneuver size and time required to detect a maneuver was done via simulation. Simulated maneuvers ranging from Av's of 0.01 m/s to 1.0 m/s are discussed. Also examined are multiple methods to recover the orbit after such maneuvers are detected. Orbits are recovered for simulated maneuvers and for a real data case of unknown maneuver size. This work is important towards developing more automatic methods of detecting maneuvers for a large population of active geosynchronous satellites. Specific contributions made by this thesis include the following:en_US
dc.description.abstract(cont.) the process and results of "tuning" of the sequential filter for a geosynchronous satellite using high accuracy ground based optical tracking data, the methods of orbit and covariance validation including an orbit overlap analysis and a statistical method using measurements, a parametric study for maneuver detection, and exploring methods for recovering post maneuver orbits quickly and accurately. With the tuned filter and optical tracking, simulations showed that a Av of 1.0 m/s could be detected as soon as 15 minutes after the maneuver, a Av of 0.1 m/s could be discernible within 6 hours and easily detected by 12 hours, and a Av of 0.01 m/s took from 12 to 24 hours to detect with confidence. The best demonstrated means for post-maneuver orbit recovery utilized a method of estimating the approximate maneuver time using the pre-maneuver filter orbit and an approximate post maneuver orbit followed by the "sprinkling" of a number of maneuvers over that period with Av's of 0 m/s but with finite covariances, and then filtering through that period.en_US
dc.description.statementofresponsibilityby Benjamin S. Aaron.en_US
dc.format.extent116 p.en_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582
dc.subjectAeronautics and Astronautics.en_US
dc.titleGeosynchronous satellite maneuver detection and orbit recovery using ground based optical trackingen_US
dc.typeThesisen_US
dc.description.degreeS.M.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Aeronautics and Astronautics
dc.identifier.oclc74495958en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record